Why did Rachio decide to have no dials - Getting Started / Before You Buy - Rachio Community

Why did Rachio decide to have no dials

post by robertokc on Apr 19, 2017

What is the story behind Rachio’s decision not to have and buttons and/or dials on the controllers faceplate? This is the biggest deal breaker for contractors and homeowners. I am fine operating the controller the way it is, but just wondering.

post by rccoleman on Apr 20, 2017

Are you using the v1 or v2 hardware? v2 does have buttons that allow you to manually start and stop zones.

post by emil on Apr 25, 2017

@robertokc, great question. We decided to design the controller with limited local controls to focus the user experience in the mobile and web app. We added manual zone operation and offline (Limited) schedules to our Gen2 controller to help contractors manage landscapes with the controller if/when they don’t have access to the app or WiFi.

I hope this helps. The days of analog devices are numbered

post by robertokc on Apr 26, 2017

I do not agree the days of standard controllers are numbered. When you look at the percentage installs of wifi based controllers it is very, very small. If you look at all the other wifi smart controllers they have dials. Continue to tell you no dials is a complete deal breaker. The buttons for limited schedules are inadequate.

post by mckynzee on Apr 30, 2017

@robertokc What functionality do you want from the dials? Are you thinking this is needed for situations where you don’t have wifi for a limited period of time, or indefinitely?

post by civdiv9999 on Apr 30, 2017

I’ll weigh in since I let the thought of getting the Rachio bake for about a year, and it’s kinda like this -

I have a wifi thermostat, but I can do 100% on the face of the device if I want to. Likewise my security system. I can control my garage with wifi, but also if I am standing there.

I did not do my due diligence on the Rachio, and when I bought it and installed and then realized the lack of local control, I was kinda bummed. Not real bummed, because I got it so I wouldn’t have to trek down to where it is just to do stuff with it, but my first thought was now I have to set my neighbors up with the app and my login so they can kill it if I have a blowout or geyser and we are gone for a few weeks. (Normally we can all go into each other’s yards and shut down whatever needs to be dealt with). I guess they could just unplug it, but the app access is fine - we have each other’s security codes, so the sprinklers are no biggy.

What would I like on the face? A master enable/disable switch that anyone can use to immediately kill the system.

post by mckynzee on May 1, 2017

@civdiv9999 That’s really helpful, I could see an emergency “off” button being helpful in those situations you described. It’s also an interesting comparison to something like Nest, while it is a connected device you can do everything locally. However, I will give us some credit and say that irrigation scheduling is a bit more complex than setting your thermostat. However, an off switch isn’t complex in the least. For now, like you mentioned, sharing access with your neighbor or having them just unplug the controller is your best bet.

post by scorp508 on May 2, 2017

A timely thread. Here are some of my cover/box suggestions that I posted in the v3 thread. I agree the lack of any exterior controls is a poor design choice. I know everyone wants to be sleek and sexy in the smart home world, but some things don’t need to be changed.

I’m tempted to leave my cover off so I and the family can access the buttons, but then the terminal strips are exposed and i don’t like that on permanent display.

post by Linn on May 2, 2017

I have reading this thread with interest, seeing why people want the dials/buttons. I must be an exception to most customers. My unit is outside, on a wall buried behind a bunch of bushes and is a real PITA to get to. So I love not having to deal with anything on the unit itself. And my sprinkler guy has Rachio in several locations so he has the app on his phone and doesn’t need it either.

That said, I did have need to get to the unit the other day when it scheduled to run, I realized that I needed to have it not run, and I couldn’t stop the schedule from starting. I put the unit into Standby mode thinking that would work to stop it, but the zone started anyway. I finally had to unplug the unit to get it to stop. I think the good news is that I believe the ability to stop/pause zones may be coming in V3 (at least I’m hoping).

post by Sammy2 on May 2, 2017

I’ve been using my Gen2 for a year and other than initial set up I have never, ever, had the need for a manual control on the unit, nor do I want it. In an “emergency” I can just go to the valve and shut it off there. I’m trying to determine what said emergency would be really. In 25 plus years of home ownership I’ve not seen a line just spontaneously burst open. There again, I use Schedule 40 for everything. Maybe just me but I can get by without controls on the controller.

post by robertokc on May 4, 2017

The answer would be for ease of setup and operation at the controller. One of the things I really like about Hydro Rain’s controller is whatever changes made at the controller make changes on the app. I keep telling you that no dials, LCD display are a total deal breaker for contractors. I respect your company very much, but for your longterm viability you must come out with a new model with these features, as well as a contractor rewards program. Utility results from rebate programs are poor based on conversations and talks I have heard. I am not sure, but I think the EPA WaterSense program is dead.

post by mckynzee on May 4, 2017

Do you think these local control needs are more for contractors and less for homeowners?

post by Linn on May 4, 2017

@mckynzee, speaking for my sprinkler guy, who is an authorized contractor with you, a contractor rewards programmer, as well as regular newsletters/updates for your authorized contractors would be good. He doesn’t have time to spend on the community, and asks me to keep him up-to-date on what’s going on.

post by robertokc on May 5, 2017

Faceplate LCD display, plus dials and buttons are important for all. But if you wish to compete well the major irrigation manufacturers this is a must. As far as install contractors you are mainly dealing with unskilled workers.

post by mckynzee on May 5, 2017

I love the newsletter idea, and I love the idea of some sort of rewards program. If you don’t mind, I would love to get in contact with your installer… DM me his info if you think he would be interested in chatting!

@robertokc Would you want the full functionality of the app within that display, or maybe just basic scheduling? I guess what I am getting at is what local functionality is most important- because I think there may be some ways to provide that using some ideas that are different than the current status quo.

post by tomlay on May 5, 2017

I like the clean “smart look” of the gen 2. The only challenge with having a wifi connection is if the wifi goes down you cannot access the controller. So only basic functionality or an alternate way of accessing the controller (own SSID?) would be nice for these situations.

I recommend that Rachio stay true to their direction. You are off to a great start with a great product. Yes, there millions of controllers to retrofit out there but as you have already seen this transition is not simple with virtually infinite use cases. I think going back to having full control via a panel is a diversion from your IOT/Smart strategy. Basic yes, maybe at the right time. I think it is a matter of prioritization, cost, development time and market adoption as you scale. As much as I would love to have soil moisture sensors I appreciate and admire your reluctance to move this direction too quickly.

post by sunny on May 5, 2017

Stay true to the smart vision.

post by franz on May 5, 2017

post by robertokc on May 6, 2017

On the front for basic install by a contractor. Also helpful if Wifi goes down.

  1. Time, date, year
  2. Start Time
  3. Station run
  4. Manual run
  5. Off
  6. Wifi signal strength (after wifi is set up by thr homeowner.

post by spscoutenPhD on Aug 28, 2018

The lack of dials makes it more intimidating for someone to attempt moving the settings. What good is a smart controller if everyone could just come by and adjust it as they think it should be without regards to your carefully calculated settings?

No dials…no unauthorized changes to the program.

I do concur that there should be some kind of emergency stop button or the ability to have a remote interface other than the smart phone to operate or program the controller.

post by laura.bauman on Aug 28, 2018

Just wanted to shoot over a note about manual controls on the Rachio controller. You can start, stop, skip, or pause a run right on the controller. Here’s a support article with more info!

-Lo

post by scorp508 on Aug 28, 2018

A lot of the car manufacturers are finally moving away from buttons and back towards dials for things like volume, temperature, and radio tuning. People seem to find them more intuitive and almost satisfying to use. I for one welcome the return of our dial overlords.

post by laura.bauman on Aug 28, 2018

Great point @scorp508! There’s also something quite satisfying of turning the volume dial to hit an even number.

post by franz on Aug 28, 2018

I’m pretty sure this is the only dial we need.

post by robertokc on Aug 28, 2018

Yeah, most of the landscape companies waste an enormous amount of water. But there needs to be a open minded look at dials and buttons.

post by spscoutenPhD on Aug 28, 2018

I love the manual feature on the Gen 2 and Gen 3. Way better than the Gen1 which had zero interface other than with a smart device. lol

post by laura.bauman on Aug 29, 2018

SO glad to hear it Steven

post by scorp508 on Aug 31, 2018

I answer with full understanding Rachio probably prefers to keep the HW costs down, functionality in the app, and isn’t catering to irrigation companies which have minimal interaction with a controller throughout a season.

Our irrigation company issues flip phones to their employees. Yes, those still exist. I’m more than happy to share our controller to them, but that isn’t happening with a flip phone.

Today physical interaction with the Gen 2 (what we have, in our 2nd season with it) is moving through zones and start/stop watering which gives 3 minutes of watering. That may or may not be enough time to inspect an entire zone. For our house this results in one guy standing at the Rachio and one guy walking the zone checking things. When paying hourly I don’t want a guy needing to babysit the controller due to lack of options.

I’d love a small LCD display with a rotary interface and select/back buttons. The buttons could be the two halves of the pie inside the rotary. It doesn’t have to be anything fancy. The rotary dial would be used for moving up/down or left/right within menus or increasing/decreasing values depending on what area of the UI you were in.

Some things I’d consider exposing in a UI.

Some informational stuff when otherwise idle could rotate through the display.

You could get really cute with the interface if you wanted to showing water levels filling the display when running a zone or other silly stuff.

post by MDNZ on Jan 28, 2019

If I want to isolate if outside and no wifi, we have a master lever/valve on the system after the backflow preventer.

Yes rachio will keep operating, but there will be no water delivered to the system

post by robertokc on Oct 13, 2019

Remember that Rachio is a company in the irrigation industry that does not offer valves, rotors, nozzles, or drip equipment. Their major achievement is their excellent software, but I think the quality of the cabinet, transformer and wiring terminals need improvement. It is too bad Rachio has not partnered with one of the irrigation leaders, which would allow them to sell their software, but have it function through a Hunter, Toro, Irritrol or Rain Bird cabinet.

post by terminator on Oct 14, 2019

I wanted to speak for a few points mentioned here.

  1. Ability to turn the system off during a blowout - I have had this happen twice this season. I have the Gen 3 and flowmeter installed. Both times the zone was automatically disabled and no water was wasted. Even if I am home it would have been pretty hard to detect it at night to manually turn it off. The way my system is placed, it would be very hard for neighbors to notice anything since the high flow would be very close to the ground.

  2. Contractor access - I get someone to pressure blow out the system at the end of the season. They just use the manual valve control in the ground boxes outside to turn the zones on and have not had a need yet to access the controller.

post by robertokc on Nov 13, 2019

I do not understand what you mean by hyper location.
Before having a Rachio I had a Toro Evolution Controller. I had two Toro Soil Moisture sensors, one in the front bermuda and the second was in the backyard fescue. My water usage plummeted from my previous controller. But it was not a wifi controller. My water use has increased since installing Rachio, but is strange to note my shrub beds are usually under watered while my grass is over watered. I like Rachio because of the app, but I honestly must keep a close watch on the landscape. There is no perfect smart controller, but I like the Rachio software.