Smart hose timer internal flooding - Troubleshooting / Tech Support - Rachio Community
Smart hose timer internal flooding
post by Fymaxwell on Jun 26, 2024
I’ve got water flooding into the battery chamber of my Rachio smart hose timer. I’ve been through this in the past with two units that Rachio replaced, and I am starting to wonder if it’s me or Rachio that’s to blame.
I am currently running four timers. Three of the timers are trouble-free. The one that is malfunctioning was bought at the same time as the two others that previously failed, so perhaps there were manufacturing issues with that batch? I’d appreciate any insight that the community might be able to offer, as this is starting to drive me mad.
Top replies
post by Thomas_Lerman on Jun 26, 2024
I have one timer with no issues.
post by franz on Jun 26, 2024
@Fymaxwell I’m having our support team reach out to you. They will take care of you!
post by WaterMunkee on Oct 9, 2024
Same here. Twice. First time I thought maybe I could’ve incorrectly installed the battery door. Lots of corrosion inside after 45 days, device quit working. After cleaning thoroughly, I installed fresh batteries and battery door and ensured everything was snug. New batteries completely rusted/corroded within 45 days again, and again device quit working. Obviously this unit’s battery compartment is not waterproof. Frustrating!
post by bgorbet on Oct 24, 2024
Same problem. I’ve only had this device a few months and its already all corroded inside. Doesn’t seem like the waterproofing works well enough.
post by PamL on Nov 18, 2024
I have only 1 timer and I have the same problem with it flooding and the batteries corroding.
post by Jkuri on Dec 15, 2024
Hello,
I seem to have a similar problem with the battery compartment. When I went to swap out the batteries the compartment had water inside.
I am quite sure that it was installed properly and I am not subject to freezing temperatures.
post by franz on Dec 16, 2024
@Jkuri I’ll have someone from our support team reach out to you. Thank you for bringing this to our attention.
post by Davico on Apr 22, 2025
I have the same issue in one of my devices, but both of them are not working as expected anymore. Water leaks from inside the device.
post by ecobuilding on Apr 28, 2025
Hi- I too am having the flooding issue. The two valves I’m running were showing as disconnected and I found the flooding when I thought it was a battery issue. I turned out the two screws holding the battery compartment to the valve body. The design is such that the flooding was confined to the battery compartment, and the circuit board and solenoid are sealed. Tried to capture in the photos.
post by wodentx on Apr 30, 2025
Wish I would have searched here before throwing my old one away that was 14 months old a few weeks ago. The responses being provided sure do instill confidence!
post by NinaGail on Jul 31, 2025
Just had this issue on one of my hose end timers. Thought it was something I did wrong til I saw this thread. My other timer has not had any issues, but it has not been in use as long. Will be extremely disappointed if this is an ongoing issue.