New Setup - Converting from RainDial

post by jeremysm1 on Oct 17, 2016

Hi Everyone,

I’m ready to jump into the new tech age of technology irrigation. I currently have a RainDial 6-zone unit (RD600-EXT-R) and want to get up and running. I’m in Scottsdale, AZ if that matters. I think I’ll need the following:

1. Rachio 8-zone
2. Waterproof enclosure
3. Flow Sensor

Sound about right? Any suggestions as to which flow sensor works the best or is most cost effective?

Top replies

post by mckynzee on Oct 17, 2016

Hi @jeremysm1 !

Super excited to have you join the team! Sounds about right if you are installing outside! The only thing I will say is getting a flow sensor is definitely optional. Depending on your needs, I would say there are probably some more cost and time effective ways to get accurate usage from your app. This community is excellent in helping with getting that done!

post by Modawg2k on Oct 17, 2016

Welcome @jeremysm1. I’m in north phoenix. I have 5 zones on my system so I went with the 8 zone Rachio. Sounds like you should get the 8 zone system unless you have plans for any type of renovation of your irrigation system. Also you’ll want an enclosure if it’s outside. I’ve had mine for 1 full summer facing the southern sun and it’s working great, so far no worries w/ heat as long as it’s within a box.

post by jeremysm1 on Oct 20, 2016

Thanks for the welcome messages! I ordered the Rachio and enclosure today but will hold off on adding the flow sensor after feeling out the system for a little while. I’m going to shoot for installation over the weekend–so keep an eye out for my frantic posts then.

post by Linn on Oct 18, 2016

I hope you love your Rachio as much as I do, @jeremysm1! I also do not have a flow sensor. I may install one sometime in the future as I travel a lot and can’t always monitor my yard.

post by jeremysm1 on Oct 20, 2016

Got the Rachio in the mail. Here is a pic of my current RainDial. Is this a simple unplug from here and plug into the Rachio setup?

Also, my electricity is piped into the RainDial on the right side, but needs to be on the left for the Rachio. Since it’s a flex cable, that should be easy enough. But I’m no electrical expert, is it the same cables/power for RainDial as the Rachio? I’m assuming that I just need to shut off the breaker box before playing with the electricity, right?

post by Modawg2k on Oct 21, 2016

@jeremysm1 I’m no electrician, no landscaper, and no Rachio employee, but I’ll try to help you as best as I can! Your Irritrol controller and setup on the wall is as same as mine was. I converted to a Gen 1 Rachio… not sure what you got. But your zone wires on the bottom will just go into the appropriate zone plugins on the Rachio.

post by jeremysm1 on Oct 25, 2016

Got the Rachio gen 2 installed yesterday. Had to run to Home Depot to get some connectors so the outside case is connected to the feeder pipes properly. Today, I need to setup the programs. The great thing is that I don’t have lawn, just desert landscape. I’ll dig through the other Arizona threads…but if anyone wants to chime in with best practices for programmed times of dessert trees, shrubs, vines and sequencing (ie time of day, duration, and how many days per week to run the program) that will be just about all I need. Thanks!

post by mckynzee on Oct 25, 2016

@jeremysm1- Welcome to the team! I’m sure some of our Arizona members will chime in- they are some of the best on here !

post by jeremysm1 on Oct 31, 2016

Okay, I finally was able to go through that link in order to confirm/find the soil type. Here are the items that I think we’re looking for:

Momoli gravelly sandy loam, 1 to 5 percent slopes. Rating 0.08

Typical profile

• A - 0 to 3 inches: gravelly sandy loam
• Bw - 3 to 60 inches: very gravelly sandy loam

Please let me know your thoughts and next steps. Thanks!

post by Modawg2k on Oct 31, 2016

So for Soil, you can set it to something like “Sandy Loam”, but then go into advanced settings and change your ‘Available Water’ (AW) to 0.08. The lower this number, the more sandy the soil is. Next step, set your vegetation correctly, so if you have the one zone with all trees, set that one to trees. Your Zone 3 looks like all shrubs, so set that to shrubs.

post by azdavidr on Oct 26, 2016

@jeremysm1 I encourage you to look at the ‘Water Use It Wisely’ site as a great orientation to how your drip zones should be configured, and how much and how often you should water your plants.