Installed rachio but it is not working

post by Mr_sriramesh on Aug 28, 2021

I had hunter unit which was working but display went off. Hence I replaced with rachio. But the unit is not working even though wiring seem fine. Any suggestions?

post by Thomas_Lerman on Aug 28, 2021

Do you happen to have a picture from the Hunter? I see two red and one white wires that are stripped, but do not seem to be hooked up (well, one red looks like it might be touching another). Also a few other wires that do not seem to be stripped or hooked up. Do you know what all the wires are? Do you know if you have a master valve or pump? How about any kind of sensor, such as a rain sensor?

post by tmcgahey on Aug 30, 2021

Usually white wires common wires for the solenoids and should be connected. You have at least one white wire not connected. Do you have a master valve or pump relay with your irrigation?