Fittings for 3/4” pipe - Wireless Flow Meter

post by laura.bauman on Mar 12, 2019

Continuing the discussion from Wireless flow meter install success!:

Hey @IxsharpxI

This link will take you to our Wireless Flow Meter Quick Start Guide, directly to the install instructions. Click the link that corresponds with your pipe size and type (copper, PVC, or PEX) and that will take you to those specific instructions. Then click down to “Required Parts & Fittings” and you’ll see a list of the required fittings!

Let me know if you have more questions!

post by IxsharpxI on Mar 13, 2019

ok i see the directions for 3/4 PEX. can i take my 6" of straight pipe that i was gonna use before, and add the 6" transition of 1" pipe and then the flowmeter, back into the 3/4?

post by laura.bauman on Mar 13, 2019

@IxsharpxI - could you share a photo of the setup so we can triple check? It seems to be compatible but I want to be sure before I confirm.

post by IxsharpxI on Mar 13, 2019

6BC6B824-FA8B-4120-BA03-DCD9A8BB4819.jpeg3024×4032 2.84 MB

post by laura.bauman on Mar 14, 2019

@IxsharpxI Should be good to go! Let us know if you run into any issues

post by IxsharpxI on Mar 15, 2019

no i just have to figure out how to get one of the 1" fittings off the flow meter i already put them on.

or can i do another 6" transition?

edit: got it off.

post by IxsharpxI on Mar 15, 2019

3CBFCC19-363C-4505-B2CF-D3A90C149510.jpeg3024×4032 2.95 MB

In a bit warmer weather we will turn the water back on and see if i built a pipe or a shower! Ha

post by IxsharpxI on Apr 11, 2019

Success, dry, enclosed pipe!